Thread: B&L condenser stop
View Single Post

  #2 (permalink)  
Old 12-22-2009, 02:08 AM
g2b2 g2b2 is offline
Senior Member
  
Join Date: Apr 2008
Posts: 558
Default
Hi,

There is a spring loaded stop pin on the top side of the condenser mount. Loosen the set screw and if the grease is not dried out the pin will pop up. You can position the condenser carrier so that the top lens surface of the condenser is 1mm below the bottom of the slide and tighten the set screw.

g2b2
__________________
A pixel is worth a thousand words but it takes a thousand words to explain a pixel. g2b2
Reply With Quote